Crochet Flora Beanie Free Pattern

Namaste friends!

I hope and pray that 2021 has begun well for you. And that you and your loved ones are safe and healthy.

March is National Crochet Month so I had to share a pattern. :)

I am a big fan of matchy-matchy, so this hat pattern was written to match my Cluster stitch cowl pattern.

Usually, I crochet top-down hats, starting with a flat circle made using DCs. I keep increasing the circle till I get the stitch count I want for the stitch pattern I have selected, as you can see in the Brooke beanie.

For this hat, I wanted to start the stitch pattern from the crown/top so after a few attempts I got it right! 

Turns out you have to increase the clusters just as you increase the DCs. And here I was trying to reinvent the wheel. :) 

So here goes the Flora crochet beanie pattern.

Skill Level:  Easy

Size: Hat measures approximately 20 inches (51 cms) around

and 8.5 inches (22 cms) in height. (Adult size)

Materials:

• DK weight yarn around 70 – 75 gms/ 2.65 oz

• Hook – US G or 6 (4 mm), UK 8

Gauge:  8 rounds and 8 clusters = 4” by 4” in Cluster pattern.

Notes: This pattern uses US terminology.

            The hat is worked top-down, in the round without turning.

Abbreviations:

beg – beginning,

ch - chain,

st – stitch,

sp – space,

sl st – slip stitch,

dc – double crochet,

yo – yarn over hook,

fpdc – front post double crochet,

bpdc – back post double crochet,

Pattern stitches:

Cl: 3 dc cluster - Into the ch-1 space indicated, yo, insert hook in sp, yo, pull through st, yo, pull through 2 loops on hook, (yo, insert hook in same sp, yo, pull through, yo, pull through 2 loops on hook) twice, yo, pull through all 4 loops on hook.

1^st cl: ch 2, dc2tog into same st as sl st counts as 1^st cluster.

Instructions:

The Flora beanie is worked top-down, so we start at the top of the crown.

• Round 1: Ch 4, join with sl st to form ring.

• Round 2: Ch 3, 11 dc into ring, join with slip stitch in 3^rd chain of beg ch 3. (12 dc)

• Round 3: (ch 2, dc2tog) in same st as sl st – counts as 1st cl, (ch 1, cl in next st) 11 times, ch 1, join with sl st in 1^st cl. (12 clusters, 12 ch-1 sps)

• Round 4: Sl st into nxt ch-1 sp, (ch 2, dc2tog) in same sp as sl st, ch 1, sk 1, (cl, ch1, cl) in nxt sp, * ch 1, sk 1, Cl in nxt sp, ch 1, sk 1, (cl, ch 1, cl) in nxt sp, rep from * 4 times, ch 1, sk 1, join with slip st in 1^st cl.  (18 clusters, 18 ch-1 sps)

• Round 5: Sl st into nxt ch-1 sp, (ch 2, dc2tog)  in same sp as sl st, ch 1, sk 1, (cl, ch 1, cl) in nxt ch-1 sp, ch 1, sk 1, *cl in nxt ch-1 sp, ch 1, sk 1, cl in nxt sp, ch 1, sk 1, (cl, ch 1, cl) in nxt sp, ch 1 sk 1, rep frm* 4 times, cl in nxt sp, ch 1, sk 1, join with sl st in 1^st cl.       (24 cl, 24 ch-1 sps)

• Round 6: Sl st into nxt ch-1 sp, (ch 2, dc2tog)  in same sp as sl st, ch 1, sk 1, (cl, ch 1, cl) in nxt sp, ch 1, sk 1, * [cl in nxt sp, ch 1, sk 1,] 3 times, ch 1, sk 1, (cl, ch 1, cl) in nxt sp, ch 1 sk 1, rep frm* 4 times, cl in nxt sp, ch 1, sk 1, cl in nxt sp, ch 1, sk 1, join with sl st in 1^st cl. (30 cl, 30 ch-1 sps)

• Round 7: Sl st into nxt ch-1 sp, (ch 2, dc2tog)  in same sp as sl st, ch 1, sk 1, (cl, ch 1, cl) in nxt sp, ch 1, sk 1, *[cl in sp, ch 1, sk 1,] 4 times, ch 1, sk 1, (cl, ch 1, cl) in nxt sp, ch 1 sk 1, rep frm* 4 times, (cl in nxt sp, ch 1, sk 1,) 3 times, join with sl st in 1^st cl.               (36 cl, 36 ch-1 sps)

• Round 8: Sl st into nxt ch-1 sp, (ch 2, dc2tog)  in same sp as sl st, ch 1, sk 1, (cl, ch 1, cl) in nxt ch-1 sp, ch 1, sk 1, *[cl in nxt ch-1 sp, ch 1, sk 1,] 5 times, ch 1, sk 1, (cl, ch 1, cl) in nxt sp, ch 1 sk 1, rep frm* 4 times, (cl in nxt sp, ch 1, sk 1,) 4 times, join with sl st in  1^st cl. (42 cl, 42 ch-1 sps)

At the end of this round your circle should measure around 6 – 6.5 inches and this is where we stop increasing.

• Round 9: Sl st into nxt ch-1 sp, (ch 2, dc2tog)  in same sp as sl st, ch 1, sk 1, * cl in nxt ch-1 sp, ch 1, sk 1, rep from * around, join with sl st in 1^st cl.  (42 cl, 42 ch-1 sps)

• Rounds 10 - 16: Repeat round 9.

Note: Work Rnd 9 as many times as required to get the height you want for the hat. Also, note that the ribbed brim will be around 1.5 – 2 inches.

To start Ribbed brim:

  I used a different colour for the brim but the same colour is fine too.

• Round 17: Ch 3 (counts as dc), *dc in nxt sp, dc in nxt st, rep from * around, ending with sl st in top ch of beg ch 3. (84 dc)

• Round 18: Ch 3, fpdc around nxt st, * bpdc around nxt st, fpdc around nxt st, rep from * around ending with sl st in top ch of beg ch 3. (84 sts)

• Rounds 19 – 22: Repeat Round 18.

Add more rounds of ribbing if desired. Fasten off leaving a six inch tail. 

Weave in the tail using your hook or a sewing needle.

There, that's your Flora beanie done!

If you do find any mistakes in the pattern, be a dear and let me know.  :)

Stay home, stay safe, stay healthy. 

Heartfelt prayers and best wishes to you and your loved ones, where ever in the World you may be.

Crochet Brooke Beanie Free Pattern

Namaste friends!

All of a sudden the human race as a whole is facing a dangerous situation. This is the kind of thing we hope to see only in movies. Sadly, it has become a reality! 

Most of us are practising strict social distancing and some of us are finding it more difficult than others. India is under complete lockdown for 21 days. Today is Day 3.

I am hoping to share a few patterns that should hopefully relieve the boredom if you are a crocheter.

* This post contains affiliate links which if you use for any purchase, may yield me a small commission, at no extra cost to you. Thank you.

Today I have the free pattern for the Brooke crochet beanie.

I hope you liked the Brooke scarf pattern. Do let me know if you tried it.

Skill Level:   Easy                  

Size: Hat measures approximately 21 inches (51 cms) around and 8 inches (20 cms) in height. (Adult size)

Materials:

·        DKweight yarn around 75 – 80 gms/ 3 oz  

·        Hook - US G or 6 (4 mm), UK 8

Gauge:  10 rounds and 2 butterflies = 4” by 4” in Butterfly pattern.

Notes:

This pattern uses US terminology

The hat is worked top-down, in the round without turning.

Chain 3 at beginning of each round counts as 1 dc.

Ch 1 and hdc at end of row counts as ch-3 space.

Abbreviations: 

beg – beginning,  

ch - chain,  

st – stitch,

sp – space,

sl st – slip stitch, 

dc – double crochet,  

yo – yarn over hook,  

fpdc – front post double crochet,

bpdc – back post double crochet,

Pattern stitches:

Fpdc: Front Post Double crochet – YO and insert hook from front to back between the posts of the first and second dc of the round below, then insert hook from back to front between the posts of the second and third dc. YO and draw the yarn around the post of the stitch. You now have three loops on the hook. YO and draw the yarn through two loops on the hook, twice. One Fpdc is complete.

Bpdc: Back Post Double crochet – YO and insert hook from back to front between the posts of the first and second dc of the round below, the insert hook from front to back between the posts of the second and third dc. YO and draw the yarn around the post of the stitch. You now have three loops on the hook. YO and draw the yarn through two loops on the hook, twice. One Bpdc is complete.

Butterfly stitch: Into the ch-5 space indicated work (3 dc, ch 3, sc in same space, ch 3, 3 dc). One butterfly made.

Instructions:

The Brooke beanie is worked top-down, so we start at the top of the crown.

Round 1: Ch 4, 11 dc in 4^th ch from hook, join with slip stitch in 3^rd chain of beg ch 3. (12 dc)

Round 2: Ch 3, 1 dc in same st * 2 dc in next st,  rep from * till the end, join with slip st in 3^rd chain of beg ch 3. (24 dc)

Round 3: Ch 3, 2dc in nxt st, *1 dc in nxt st, 2 dc in nxt st,  rep from* till the end, join with slip st in 3^rd chain of beg ch 3. (36 dc) 

Round 4: Ch 3, 1dc in next st, 2dc in nxt st, * 1dc in nxt 2 sts, 2dc in nxt st, rep from * till end, join with sl st in 3^rd ch of beg ch 3.   (48 dc)

To start Butterfly lace pattern:

Round 5: Ch 1, sc in same st., *ch 3,  sk 1, sc in nxt st, ch 3, rep from * around ending with ch 1, 1 hdc in 1^st sc of round – counts as a ch-3 sp.            (24 Ch-3 sps).

Round 6: Ch 1, sc in sp below, ch 3, sk sc below, sc in nxt ch-3 sp, sk sc, work a butterfly in nxt ch-3 sp (refer to Pattern stitch above),  * sk nxt sc, sc in nxt ch-3 sp, ch 3, sk nxt sc, 1 sc in nxt ch-3 sp, sk sc, butterfly in nxt ch-3 sp, rep from * around ending with sl st in 1^st sc of round. (8 butterflies, 8 ch-3 sps).

Round 7: Sl st into ch-3 sp, ch 3, 2 dc in same sp, *ch 3, sk sc, sk 3 dc, 1 sc in top ch of ch 3 below, ch 5, sk sc below,1 sc in top ch of ch 3, ch 3, sk 3 dc, sk sc , 3 dc in ch-3 sp , rep from * ending with ch 1 and hdc in top ch of beg ch 3.   ( 24 dc, 16 ch-3 sps,  8 ch-5 sps).

Round 8: Ch 1, sc in sp below, Ch 3, sk 3 dc, sc in nxt ch-3 sp, sk sc, butterfly in ch-5 sp, * sk sc, sc in nxt ch-3 sp, ch 3, sk 3 dc, sc in ch-3 sp, sk sc, butterfly in ch-5 sp, rep from * around, ending with sl st in 1^st sc of round. (8 butterflies, 8 ch-3 sps)

Rounds 9 – 16:  Repeat rounds 7 and 8 alternately.

Note: Work these two rounds (Rnds 7 and 8), as many times as required to get the height you want for the hat. Take care to end with an even numbered (butterfly) round. Also, note that the ribbed band will be around 1.5 inches.

    

Round 17: Sl st into ch-3 sp, ch 3, 2 dc in same sp, *ch 3, sk sc, sk 3 dc, 1 sc in top ch of ch 3 below, ch 3, (please note that in this round we chain 3 and NOT chain 5),  sk sc below,1 sc in top ch of ch 3, ch 3, sk 3 dc, sk sc , 3 dc in ch-3 sp, rep from * ending with ch 3 and sl st in top ch of beg ch 3. ( 24 dc, 24 ch-3 sps).

To start Ribbed brim:

Round 18: Ch 3, dc in nxt 2 sts, 3dc in ch-3 sp, sk sc, 3 dc in ch-3 sp, sk sc, 3 dc in ch-3 sp, *dc in nxt 3 sts, 3 dc in ch-3 sp, sk sc, 3dc in ch-3 sp, sk sc, 3dc in ch-3 sp, rep from * around ending with sl st in top ch of beg ch 3. (96 dc)

Round 19: Ch 3, fpdc around nxt st, * bpdc around nxt st, fpdc around nxt st, rep from * around ending with sl st in top ch of beg ch 3.

Rounds 20 – 22: Repeat Round 19.

         Add more rounds of ribbing if desired. Fasten off leaving a six inch tail. Weave in the tail using your hook or a sewing needle.

There, that's your Brooke beanie done!

I wouldn't be surprised if there are some mistakes in the pattern, so if you do find any, be a dear and let me know.  :)

Stay home, stay safe, stay healthy. 

Heartfelt prayers and best wishes to you and your loved ones, where ever in the World you may be.

See you soon.

* This post contains affiliate links which if you use for any purchase, may yield me a small commission, at no extra cost to you. Thank you.

Crochet Brooke Scarf Free Pattern

Namaste friends.

Hope 2020 has started well for you. A New Year calls for a new pattern, so I have the Brooke crochet scarf pattern for you.

Crochet Classes

Before we move on to the pattern I have some great news to share, especially if you stay in Mumbai. 

My Crochet Classes are now in session at Kanjurmarg East. 

There are weekend batches for working women and classes for beginners as well as advanced crocheters.

For more details, you can contact me by email at crochetkari@gmail.com and also on Facebook and Instagram.

Crochet Brooke Scarf Pattern

This is a very easy pattern as it uses only DCs and SCs.

Skill Level:    Easy                    

Size: Scarf measures approximately 74 inches  and  8.5 inches

         wide ( 187 cms by 21 cms).

Materials:

·        Yarn - DKweight yarn* around  185 gms/ approx. 6.5 oz   

·        Hooks - US G/6(4.00 mm),* UK 8

Gauge:  10 rows = 4". 
               Two Butterflies and two 3dc groups = 4".

     

Notes:

·        This pattern uses US terminology.

·        Ch 3 at beginning of row counts as first Dc.

·        The pattern is worked in multiples of 12 + 2.

Abbreviations: 

beg – beginning,  

ch - chain,  

st – stitch,

sp – space,  

yo – yarn over hook,

sc – single crochet,

dc – double crochet,

rep – repeat,

RS – Right side.

Pattern stitches:

Butterfly stitch: Into the space indicated work (3 dc, ch 3, sc, ch 3, 3 dc). One butterfly made.

Instructions:

Row 1: Ch 50, sc in 2^nd ch from hook, * ch 3, sk 3 ch, sc in nxt ch, rep from * till end. Turn. (12 ch-3 sps).

Row 2: (RS)  Ch 1, sc in the 1st st, ch 2, sc in ch-3 sp, sk sc, butterfly in nxt ch-3 sp (see pattern stitch above), * sk sc, sc in nxt ch-3 sp, ch 3, sk sc, sc in nxt ch-3 sp, sk sc, butterfly in nxt ch-3 sp, rep from * across ending with ch 2, sc in last sc. Turn. (4 butterflies, 2 ch-2 sps, 3 ch-3 sps)

Row 3: Ch 3, 2 dc in ch-2 sp, * ch 3, sk sc & 3dc, sc into top of ch 3, ch 5, sk sc, sc into top of ch 3, ch 3, sk 3dc & sc, 3 dc in ch-3 sp, rep from * across ending with 2 dc in ch-2 sp and dc in last st. Turn.                     (15 dc, 8 ch-3 sps, 4 ch-5 sps)

Row 4: Ch 1, sc in the 1st st, ch 2, sk 2 dc, sc in ch-3 sp, sk sc, butterfly in nxt ch-5 sp, * sk sc, sc in nxt ch-3 sp, ch 3, sk 3 dc, sc in nxt ch-3 sp, sk sc, butterfly in nxt ch-5 sp, rep from * across ending with ch 2, sc in top og beg ch 3. Turn. (4 butterflies, 2 ch-2 sps, 3 ch-3 sps)

Row 5: Repeat Row 3.

Row 6: Repeat Row 4.

To complete one half of the scarf, repeat rows 5 and 6 till scarf measures 33 – 35 inches (or as long as desired). Take care to stop at an even-numbered (butterfly) row, then work last two rows as follows;

Last odd Row: Ch 3, 2 dc in ch-2 sp, ch 1, sk sc & 3 dc, sc into top of ch 3, [ch 3, sk sc, sc into top of ch 3, ch 2, sk 3 dc & sc, 3 dc in ch-3 sp, ch 2, sk sc & 3 dc, sc into top of ch-3 sp,] 3 times, ch1, sk 3dc & sc, 2 dc in ch-2 sp, dc in last st.  Turn. (15 dc, 2 ch-1 sps, 6 ch-2 sps, 4 ch-3 sps)

Last even Row: Ch 1, sc in first st, sc in nxt 2 sts, sc in ch-1 sp, * sc in nxt sc, 3 sc in ch-3 sp, sc in nxt sc, 2 sc in ch-2 sp, 1 sc in nxt 3 dc, 2 sc in ch-2 sp, rep from * ending with sc in ch-1 sp, sc in nxt 3 sts. (49 sc).

         Fasten off. Weave in the yarn tail.

To complete the other half of the scarf, with right side (RS) facing you, attach yarn to first Sc of Row 1.

Row 1: Work as per Row 2 above.

Row 2: Work as per Row 3 above.

Row 3: Work as per Row 4 above.

To complete the second half of the scarf, repeat rows 2 and 3 till scarf matches the first half. Take care to stop at an odd-numbered (butterfly) row, then work last two rows as follows;

Last even Row: Ch 3, 2 dc in ch-2 sp, ch 1, sk sc & 3 dc, sc into top of ch 3, [ch 3, sk sc, sc into top of ch 3, ch 2, sk 3 dc & sc, 3 dc in ch-3 sp, ch 2, sk sc & 3 dc, sc into top of ch-3 sp,] 3 times, ch1, sk 3dc & sc, 2 dc in ch-2 sp, dc in last st. Turn. (15 dc, 2 ch-1 sps, 6 ch-2 sps, 4 ch-3 sps)

Last odd Row: Ch 1, sc in first st, sc in nxt 2 sts, sc in ch-1 sp, * sc in nxt sc, 3 sc in ch-3 sp, sc in nxt sc, 2 sc in ch-2 sp, 1 sc in nxt 3 dc, 2 sc in ch-2 sp, rep from * ending with sc in ch-1 sp, sc in nxt 3 sts. (49 sc).

         Fasten off. Weave in the yarn tail.

Hope you enjoy crocheting the Brooke Scarf. 

CLICK HERE TO PIN THIS PATTERN

The ad-free print-friendly PDF pattern is available on Etsy and Ravelry.

Feel free to let me know if you find any errors in the pattern.

Next time I will post the free pattern for the Brooke beanie shown above.

Until then Happy crocheting! :)